Hardwood Flooring Terms You Should Know
Feb 10, 2025
As you go through the process of installing new hardwood floors in your home, you will probably come across some terms that you’re not familiar with. No worries! We’re breaking down popular hardwood flooring terms so you won’t be left confused.
Sanding
This is the removal of the hardwood floor finish and stain to get to the wood grain.
Edging
Similar to sanding, but it is done on the edges of the floor and in tight crevices.
Refinishing
This is the process of making an older hardwood floor in a home come back to life. It entails sanding of the original finish and stain to get right down to the wood grain. Then, it is re-stained and new coats of finish are applied for durability.
Installation
This is the general process of placing planks of wood on the floor of a home. Sometimes you may be installing new wood over an existing floor or directly over concrete or a subfloor.
Concrete Subfloor
This is a layer of concrete below the hardwood floors. This makes sure the area is even and stable. In this case, an engineered wood floor would need to be installed.
Wood Subfloor
This is a layer of wood underneath the final hardwood floors. This subfloor helps make the space flat before installing the floor planks, which are nailed directly into the subfloor.
Moisture
Even though it is just a small amount of water, moisture can negatively affect your hardwood floors. Moisture can come from underneath the house, outside, or in the actual subfloor. Hardwood floors can only be installed after the moisture levels are taken and deemed to be at appropriate levels.
Water Base & Oil Base
These are just two types of finishes Signature Hardwood Floors applies to the top of the newly installed hardwood floors. There are several differences between the two and should definitely be addressed prior to work being done. Ask your professional to explain those differences.

7 More Key Hardwood Flooring Terms Every Customer Should Know
- Janka Hardness Rating – This measures how hard and durable a wood species is. A higher rating means the wood is more resistant to dents and wear. For example, oak has a medium rating, while hickory is much harder. Softer woods may show more signs of wear over time.
- Solid Hardwood – This type of flooring is made from a single, solid piece of wood. It is durable and can be sanded and refinished multiple times, making it a long-lasting option. However, it can expand and contract with changes in humidity, so proper installation is important.
- Engineered Hardwood – Unlike solid hardwood, engineered hardwood is made from multiple layers of wood, with a top layer of real hardwood. It is designed to be more stable and resistant to humidity changes, making it a good choice for areas where moisture levels fluctuate.
- Acclimation – Before installing hardwood flooring, it needs time to adjust to the temperature and humidity of your home. This prevents excessive expansion or shrinking after installation. Acclimation usually takes a few days and helps ensure the flooring stays in good condition.
- Beveled Edge – Some hardwood planks have slightly angled edges, which create small grooves between boards. This design can help hide minor imperfections and give the flooring a distinct look.
- Underlayment – A thin layer of material placed between the hardwood flooring and the subfloor. It can help reduce noise, provide cushioning, and offer some protection against moisture. The type of underlayment needed depends on the flooring and subfloor type.
- Expansion Gap – Wood naturally expands and contracts with temperature and humidity changes. To prevent warping or buckling, installers leave a small gap around the edges of the room, which is later covered by baseboards or trim.
To learn more about hardwood flooring terms and the process, contact the flooring experts at Signature Hardwood Floors by calling 410.415.0755 or click here today! You can also follow us on Facebook, Twitter, and LinkedIn!